Monthly Archives: October 2010

MPLS Core Networks – Configuration examples

To have MPLS working in certain network you have to do several simple steps: 1. Have the boxes up and running. 2. Enable basic IP connectivity. 3. Configure routing protocol. 4. Enable MPLS on interfaces. So you may find simple … Continue reading

Posted in MPLS Core Networks, NGN Backbone Networks | Tagged , , , , | 2 Comments

MPLS Core Networks – Lecture 3

Contents Label Assignment and Distribution Typical Label Distribution in Packet-mode MPLS Convergence in Packet-mode MPLS MPLS Label Allocation, Distribution and Retention Modes LDP Neighbor Discovery Penultimate Hop Popping You may find the lecture presentation here. Slide 2 nLabel Assignment and … Continue reading

Posted in MPLS Core Networks, NGN Backbone Networks | Tagged , , , , | 3 Comments

MPLS Core Network – Lecture 2

So in lecture 2 you will find information about: Identify the drawbacks of traditional IP routing Describe basic MPLS concepts and LSR types. MPLS Labels and Label Stack MPLS applications MPLS success story You can find the lecture here.

Posted in MPLS Core Networks, NGN Backbone Networks | Tagged | 4 Comments

MPLS Core Networks – Course start

Hi Guys and Gals, So the course has started and the first test was passed. The results are: 1. Dimitar Dimitrov – good, take a deeper look on the ISP network architectures (e.g core, distribution, access layers, service zones – … Continue reading

Posted in MPLS Core Networks, NGN Backbone Networks | Tagged , , , | 1 Comment

4to6TRANS dsc2010 conference participation

The project concepts, objectives and current status were officially presented on the “5th South East European Doctoral Student Conference”, 13 – 14 September 2010, Thessaloniki – Greece. You may find the presentation from the event here. And the article itself … Continue reading

Posted in IPv4 to IPv6 network transformation | Tagged | Leave a comment